Agility Telemetry Radio (ATR)

Description:

The Agility Telemetry Radio (ATR) includes 2 models that offer user-configurable data rates, channel bandwidths and operating frequency. The ATR is supplied with a VHF or UHF RF Module and operates on any channel within the approved bands. A wide variety of applications are supported including SCADA, Video Surveillance and Voice over IP. The radio may be used to create Point-to-Point (PTP), Point-to-Multipoint (PTM) or simplex (one-way) networks with priority routing support for voice, compressed video and SCADA traffic. Ethernet and RS-232 interfaces are available.
The ATR operates in both licensed and secondary-use spectrum. Local and remote network management is provided through a local TCP IP connection over the air. Management is provided through a PC-based Element Management System provided by KTS.

Features:

• Data Rate, Channel Size and Frequency Agile
• Channel Sizes from 6.25 to 175 KHz
• Agile RF Modules
  • VHF: 150-174 MHz and 217-220 MHz
  • UHF: 450-512 MHz
• Data Rates from 2.4 to 68 kbps
• Optional wireless link encryption
• Up to 37 dBm transmit RF power
• FCC Part 15 and 90 and ETSI 300-113-1 compliant*
• Ethernet Port with bridging
• RS-232 Serial Port
• Software upgradable (Local or over-the-air)
• Modulation: 2-FSK and 4-FSK

The Ethernet port functions as a bridge for IP subnets via the wireless link
The ATR is available with an optional, custom Daughterboard. Contact KTS for applications
and capabilities.

Specifications:

Electrical
RF Module frequency bands (factory selectable)
VHF	ATR-US-V-100
UHF	ATR-US-U-100
RF Transmit Power	10 to 37 dBm
Noise Figure	4 dB
Spurious & Harmonic Emissions	FCC Part 15 & 90 compliant
Data Rates	2.4 to 68 kb/s, SW configurable
Modulation	2-FSK, 4-FSK
Channel Bandwidths	6.25, 12.5, 25, and 50 kHz
Frequency Selection	6.25 kHz steps
Selectivity	>80 dB
Operating mode	Half-duplex or simplex
User Ports	RS-232 (DCE); Ethernet (10/100 BT)
Mechanical
Dimensions	3.75” x 5.0” x 1.5”
Enclosure material	AL, TCP coating
Weight (wall mount)	1.2 lb
Mounting Universal	Wall w/Fan, DIN Rail
Environmental
Operating Temperature Range	-30 to 60 C
Operating Humidity	Up to 95%, non-condensing
Power
Input Voltage	9-24 VDC
Current	0.5 A (RX), 2.5 A (Tx)
Connector/Fan	Terminal block

Available for shipment TODAY Order NOW 1-877-220-6114

ATR Product Sheet

Specifications subject to change without notice
*FCC and ETSI Approval pending